Plaster, Trackwork and Groundpreparations

IMG_3844After the preparation of the backdrop and the installation of the lights the plastering continued. The first coat of plaster was sanded to remove any rough bumps and to detect spots with too less or no coverage. I mixed up a new batch of plaster with 45 minutes of working time to fill the some holes and make some corrections to the landscape. After drying this the whole plaster was sanded again. I vacuumed the layout and cleaned the track – which is not so enjoyable with K-Track. A slow test-drive ensured smooth operation of Märklin locomotives.


IMG_3845Before painting the plaster, I decided to give my new airbrush a try and painted the rails. Before spraying the rails, I covered the “Pukos” with some tape to reduce the amount of cleaning that will be required after painting the track. To paint the rails I used a mix of black, rust and leather brown email colours from Revell and about the same amount of thinner. I like the result. The paint covers the shiny code 100 rails very good and makes them less dominant.


The plaster got a basic coat of wall paint. I made a mix of yellow and brown for the area around the drainage channel. For the rest of the layout I added black to this mix and painted all visible surfaces.

IMG_3853IMG_3852When the paint was dry, I started ballasting the track. A while ago I ordered a sample package of ballast at Koemo Modellbahnschotter. It consists of six 40 ml bags of different ballast colours. I made a test with every single single type. For this layout I have mixed all colours. The uncoloured types stood out pretty obviously. To blend them in I added a small amount of “dirt” and rust weathering powders. That worked well so I the games could begin.  After applying the glue, the ballast looked much darker.

Oldershausen Testdrive

I prepared the mount for the LED-Strip-Lights. The strips are equipped with an adhesive tape and have and illuminate with an angle of 120 degree. To maximise the light yield and reduce the loss I cut an strip of wood at an angle of 30 degree. This strip and the LEDs should be mounted at the very front of the cover, directly behind the fascia. I made some tests with this installation before fixing it in place.

I was quite satisfied with the results and fixed the LEDs in place. After the installation I could not resist and had to unpack my lovely Athearn Genesis GP38-2 and switch some cars.

The GP38-2 runs good and sounds great. I used Märklin K-Track with long turnouts. These can be used for the typical “Punktkontakt” (Pukos, third rail in dots) AC locomotives but it can also be used for DC locomotives. Sadly not all DC locomotives can cope with the “Pukos” at the turnouts as they are higher than the outer rails of the track to prevent any shorts. Sadly this locomotive seems to lock up at the Pukos with the couplers. So I could not enjoy a smooth run but nevertheless I am motivated to get this project done and proceed with an US switching layout as my next project.

Painting the Backdrop and Clouds

After the backdrop was fixed my daughter and I could move on and paint it.  The first color we mixed was pretty blue. Too blue. Thus we added some black and white to tone it down. Now we got a nice blue-gray background which imitates a normal day. Now we may add some clouds.

After the paint dried, we created some paper stencils for the clouds. We tried spraying the clouds as I remember seeing in TMTV Juli 2014. I guess we did reuse the same stencil to often. Additionally the spray can was too small and didn’t work very clean. My wife doesn’t like the look of the clouds and thinks they look to uniform. May be we will repaint the backdrop and the clouds later but for now they will stay. Regarding the photos: The camera of my iPhone has collected some dirt, so all the dark fringes in the fuzz in the pictures is not used as backdrop color 😉

Playing with plaster and laying track

The culvert was fixed in place with plaster. The kids used the opportunity to give the landscape a basic shape. And they had fun doing it.

After the plaster has dried for a while, we glued the tracks to the surface. We used any that was in reach to fix it down, while the glue could set.

Oldershausen Mockup with backdrop



My vision for this small layout is using a display-style (lightbox?) fascia. As this layout is intend for learning and experiments I wanted to try a curved backdrop. I want my kids to have fun with this layout. Currently they not as tall as I am, so I had the idea of curving the background from the back to the top. This leaves me with square corners on the left and right, bit I hope this can be covered up with some scenery.

After building the the support structure for the backdrop, I tried to bend the hardboard into the curve. I thought this thin hardboard is flexible enough. It is not. It is so stiff that I accidentally punched a large hole into the hardboard. This will be fixed later.

With the finished backdrop I could not resist to setup a quick mockup of the overall design. The LED-Stripes for the lightning are held in place by pushing them into small gaps in the framework. The fascia will be painted black to reduce the distraction and focus the interest on the layout itself.

Broken turnout

I have prepared my Märklin K-Track turnouts to be operated from below the benchwork. While removing the cover under the track, the switch rod broke apart. I have rebuilt it from a tiny strip of 1 mm styrene. I hope this works.


19th Century Culvert: Second try

This version of a culvert is built from 1 mm styrene. The curved tunnel is made from 0.5 mm styrene. The profile of the rocks and bricks have been carved into the surface of the styrene. The idea is to paint the parts accordingly to recreated the look of the original.

19th Century Culvert: Second Prototype

After not being satisfied with the result of my first try, I took my bike, camera and dog to search a new prototype for my little culvert.

This culvert is a little overgrown but the basic shape is still very good visible. In contrast to my first try this culvert has been built from rock and bricks. The tunnel is round and not square. So this element is a little more complex, but we will see how it works out.